Misfeed In The Bypass Tray - Sharp AR-5520N Operation Manual

TROUBLESHOOTING
Section C
Remove the misfed original from the exit area.
If the misfed original cannot be easily removed
from the exit area, open the moveable part of the
document feeder tray and remove the original.
2
Open and close the RSPF to make the
misfeed location indicator stop
blinking.

MISFEED IN THE BYPASS TRAY

1
Gently pull the misfed paper out.
92
You can also make the
misfeed indicator stop
blinking by opening and
closing the feeding roller
cover or the right side
cover.
3
Return the originals indicated by the
minus number in the display to the
document feeder tray and press the
[START] key (
Copying will resume from the originals that still
remained when the misfeed occurred.
2
Open and close the side cover.
• When closing the side cover, press down on
Note
the handle.
• If the misfeed indicator (
blinking, check for torn pieces of paper in
the machine.
).
The misfeed indicator
( ) will go out.
) does not stop