Sharp MX-M200D Operation Manual page 57

7
Press the key.
@
READ
ACC. #-C
The vertical ratio can now be selected.
8
Set the vertical ratio with the [ ], [ ],
[ ], or [ ] keys.
A preset ratio can be selected
with the [
ratio can be adjusted in
increments of 1% with the [
or [
To change the copy ratio in the
horizontal direction again, press
the
9
Press the [OK] key.
OK
You will return to the base
screen.
10
Make sure that the desired paper tray
is selected.
If the auto paper select function has been
enabled, the appropriate copy paper size will be
automatically selected based on the original size
and the selected copy ratios. Image rotation will
take place if necessary.
XY ZOOM
121% ZOOM
100% X: 121%
95% Y: 100%
[ ]:X Y
] or [ ] keys. The
]
] keys.
key.
Ready to copy.
8 x11R 1
2
AUTO
X121% Y 99%
8 x14
1
AUTO
2
11
Select any other copy settings as
needed and press the [START] key
( ).
MNO
WXYZ
@.-_
AD-END
If the [ZOOM] key is pressed when XY zoom
Note
ratios are set, the following screen appears.
XY ZOOM
ADJUST
OFF
To cancel the XY zoom ratio settings, select
"OFF" and press the [OK] key.
To adjust the XY zoom copy ratios, select
"ADJUST" and press the [OK] key.
COPY FUNCTIONS
4
55