Loading Paper; Paper - Sharp MX-M200D Operation Manual

BEFORE USING THE PRODUCT
Default settings
The machine is set at the factory to return all settings to the default settings one minute after a copy job is finished
(auto clear function) or when the [CA] key is pressed. When the settings return to the default settings, any functions
that were selected are canceled.
The auto clear time can be changed in the system settings. (See the "System settings guide".)
In the default state the display shown below appears. The default state of the display may vary depending on
settings in the system settings.
Ready to copy.
A4
AUTO
100%
8 x11 1
AUTO
2

LOADING PAPER

The message "TRAY< >:Add paper." will be displayed when there is no copy paper in the selected paper tray.
(< > is the tray number.) Load paper in the indicated paper tray.

PAPER

The specifications for the types and sizes of paper that can be loaded in the paper trays are shown below.
Paper tray Tray No.*
Tray 1
Tray 2
Tray of 250-sheet
2 or 3
paper feed unit
2 or 3
Tray of 2 x 250-sheet
paper feed unit
3 or 4
Bypass tray
*1 5-1/2" x 8-1/2" (A5) can be used in tray 1 but cannot be used in other trays (including trays in optional paper feeding unit).
*2 When making a large number of copies or prints using 24 lbs. (90 g/m
when about 100 pages have been printed. The output may not stack correctly if more than 100 pages are allowed to accumulate.
*3 The number of sheets of the paper which can be set changes with the weight of a paper. (The indicated numbers are for 20 lbs. (80 g/m
*4 The trays are numbered 1, 2, 3, and 4 from the top.
*5 To use thick paper, a setting that is suitable for thick paper must be selected (page 20).
*6 Index
Paper that can be used for automatic 2-sided printing
Paper used for automatic two-sided printing must meet the following conditions:
Paper type: Plain paper (special paper cannot be used.)
Paper size: Standard sizes (11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, A3, B4, A4, A4R, B5, B5R, A5)
Paper weight: 15 lbs. to 24 lbs. (56 g/m
18
4
Paper type
1
5-1/2" x 8-1/2"*
2
8-1/2" x 11" (Letter), 8-1/2" x
Standard paper 11"R, 8-1/2" x 13"
Recycled paper (Foolscap), 8-1/2" x 14"
(Legal), 11" x 17" (Ledger)
(A5*
Standard paper
Recycled paper 5-1/2" x 8-1/2" (Invoice) to
11" x 17" (Ledger)
Transparency film
(A6R to A3)
Labels
5-1/2" x 8-1/2" (Invoice) to
8-1/2" x 11" (Letter)
(A6R to A4)
5
Thick paper*
5-1/2" x 8-1/2" (Invoice) to
11" x 17" (Ledger)
(A6R to A3)
Commercial 10 (4-1/8" x 9-1/2")
International DL (110 mm x
Envelopes
220 mm), International C5
(162 mm x 229 mm)
to 90 g/m
2
Paper size
1
(Invoice),
1,
B5, B5R, A4, A4R, B4, A3)
2
) paper, remove the output from the paper output tray
2
)
Weight
250 sheets (20 lbs.
(80 g/m
2
15 lbs. to 24 lbs.*
(56 g/m
2
to 90 (Load paper lower
g/m
2 2
)* than the line on the
tray)
15 lbs. to 24 lbs.
100 sheets*
(56 g/m to 90 g/m
2 2
)
Load one sheet of
these papers at a time
to the bypass tray.
Load one sheet of
6
33 lbs. to 110 lbs. *
paper each time on
(129 g/m to 200 g/m
2 2
)
the bypass tray.
You can load multiple
28 lbs. to 33 lbs.
sheets of paper on the
(106 g/m to 128 g/m
2 2
)
bypass tray.
You can load multiple
24 lbs. to 28 lbs.
sheets of paper on the
(91 g/m to 105 g/m
2 2
)
bypass tray.
5 sheets
Capacity
2 3
))*
3
2
) paper.)