Rear Panel - SAB Explorer PVR SC User Manual

System Connection

Rear Panel

① ②③④⑤⑥ ⑦
Please refer to the diagram above for all possible connections of your receiver
Do not connect the unit to the mains socket until all other connections
have been made and checked.
1) LNB1 IN : This port is to connect the coaxial cable from LNB of your Dish.
2) LNB1 OUT : This enables the connection of an Analogue receiver.
3) LNB2 IN : This port is to connect a satellite antenna cable or connect LNB 1 OUT.
4) LNB2 OUT : This enables the connector of an Analogue/Digital receiver.
5) ANT IN : This is used to connect the analogue antenna input.
6) TV OUT : This is used to connect your TV through RF cable.
7) VIDEO : This RCA connector is used to connect your TV through RCA cable.
AUDIO R/L : These RCA connectors are used to connect your TV through RCA
cable or any external audio amp or system.
8) VCR SCART : This Scart connector is used to connect any external video.
9) TV SCART : This is used to connect your TV through Scart cable
10) S/PDIF : This is used to connect with Digital audio amplifier (Optional)
11) RS 232C SERIAL PORT : This is used to connect your receiver with a computer
12) USB : PC to STB, STB to PC data transfer and receiver (Optional)
⑧ ⑨⑩ ⑪
or other STB through a serial cable.
⑫
8