Menu Guide :
Installation
◈ Service Searching
Edit
Place the cursor on the satellite which you want to edit and press the "Red" key to
move satellite edit menu.
1) Tuner Select
PVR has two tuner input. You can select either one
2) Ant Connect
You can select antenna connection mode.
Loop / Split / Dual mode support
3) LNB Power
Depending on the type of LNB cling to your antenna, you can supply either LNB
power by setting "On" or not by setting "Off".
4) LNB Frequency
You can select the predefined Local Frequency (0....9, One Cable1/2 , 5150,
9750, 10600, 10750MHz or Universal) by pressing the ◀▶ keys or manually
enter a specific frequency in MHz unit by pressing the numeric keys.
You can input the number only when it displays "0...9".
15
Need help?
Do you have a question about the Explorer PVR SC and is the answer not in the manual?