SAB Explorer PVR SC User Manual page 29

Menu Guide :
System Setup
◈ Parental Control
1. System Lock
To lock the receiver, select "System Lock" in the "Parental Control" menu and change
it to the "On" mode by using the "◀,▶" keys.
If the receiver is locked, whenever you try to start the STB, the "Password" screen
will appear and you will be asked to enter your Password.
2.Channel Manager Lock
To lock the Channel Manager, select "Channel Manager Lock" in the "Parental
Control" menu and change it to the "On" mode by using the "◀,▶" keys.
3. Installation Lock
To lock the Installation Menu, select "Installation Lock" in the "Parental Control" menu
and change it to the "On" mode by using the "◀,▶" keys.
4. Change Password
You can change your Password from the factory default value "0000" as follows:
Select "Change Password" in the "Parental Control" menu.
You will then be asked for a new password.
Once you enter a new password, the system will ask you to re-enter for
confirmation.
When you have entered a new password twice, the password has been changed.
If you forget the password, contact the distributor to recover it.
29