SAB Explorer PVR SC User Manual page 10

System Connection
Connecting Your System
◈ TV with Motorized System (DiSEqC 1.2)
There are two ways to connect the STB to your existing TV system. We
recommend using one of the following cases for the best result
• Connect one end of RCA cable to the RCA jack on the back of the STB and the
other end to a RCA jack on your TV.
• Or connect one end of Scart cable to the Scart jack on the back of the STB and the
other end to a Scart jack on your TV.
• Connect one end of your coaxial cable to the LNB IN connector on the STB and the
other end to the REC or Receiver connector on the DiSEqC 1.2 motor.
• Connect the coaxial cable from the LNB to the LNB connector on the DiSEqC 1.2
motor.
◈ Reference
DiSEqC 1.0 Connection
All our receivers are designed to be DiSEqC 1.0 and DiSEqC 1.2 compatible.
This allows multiple antennas to be connected to the STB at the same time.
If you have two or more fixed antennas or LNBs, then we recommend you use a
DiSEqC 1.0 switch.
Connect the coaxial cable from the first LNB to the LNB 1 or LNB A input connector
of the DiSEqC switch.
Do the same for any other LNBs that you have.
Connect one end of a coaxial cable to the RF output connector of the DiSEqC
switch, connect the other end to the LNB IN socket on the STB.
To the digital receiver, you can connect either a single satellite antenna directly or
LNB of multi-feed equipment.
USALS System
When it comes to USALS System, please refer to Page 17.
10