SAB Explorer PVR SC User Manual page 28

Menu Guide :
System Setup
◈ Modulator Settings
1. RF Channel
Select or change the RF channel number when the STB is connected to the TV
by the RF jack. (Ch21~Ch69) Default : Ch38
2. RF Type
You can select the RF type by using the ◀ ▶ keys out of PAL B/G, I D/K.
◈ Time Settings
1. Time
You can set the Current Time
(Local area time) in this mode.
To set the Current Time, select the
value using the standardized
information of current service area
by pressing the ◀ ▶ keys.
The time setting will be used as the
standardized time for the I-Plate,
Program Guide and Sleep Timer.
Current Time is based on TDT (Time and Date Table) at the stream of the current
service.
2. Summer Time
You can set the summer time "On" or "Off".
3. Wake Up Time
You can set the time for STB to be turned on automatically. STB will be turned on
automatically at the time you set everyday, unless you erase the setting time.
4. Wake Up Status
You can select Once/Daily mode.
5. Screen Saver
It activates only in Radio mode without any window in TV screen after a default time
passes, 30 minutes.
If you want to change the screen saver starting time, please follow the below steps.
Go to Main Menu → Select System Setup → Time Setting → Screen Saver
Note : Captured images display on TV screen in turns automatically.
6. Time Zone
28