Table of Contents
Advertisement
Menu Guide :
Installation
◈ Service Searching
Edit
1) 22KHz
In case you are using a Dual LNB or two antennas connected to a 22KHz tone
switch box, make 22KHz tone switch Enable or Disable to select LNB or antenna.
2) DiSEqC
DiSEqC must be used when using two or more antennas and LNBs.
Select None, DiSEqC 1.0 , DiSEqC1.1 , MOTOR and USALS.
3) Committed
Set the port number of DiSEqC 1.0 switch
4) UnCommitted
Set the port number of DiSEqC 1.1 switch.
5) Save
After Setup complete, Press "RED" key to save
16
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Explorer PVR SC and is the answer not in the manual?
Questions and answers