SAB Explorer PVR SC User Manual page 19

Menu Guide :
Installation
◈ Service Searching
Transponder
1) Edit
• Press the red key to change the parameter values of the selected transponder.
• Place the cursor on the sub menu by using the ▲▼ keys and press the ◀ ▶ keys
or " NUMERIC" key to change the setting.
• Insert the frequency of the transponder you want to edit.
• Select the polarization of the transponder you want to edit ( Horizontal / Vertical ) .
• Input the symbol rate of the transponder you want to edit.
• Select the FEC (Forward Error Correction) of the transponder you want to edit.
2) Add
If you cannot find the desired transponder from the transponder list, you can add
it by inputting appropriate parameter values for a new transponder.
19