SAB Explorer PVR SC User Manual page 18

Menu Guide :
Installation
◈ Service Searching
Rename
Select the satellite name you would like to rename and press the "OK" key.
By using the "BACK" buttons, Move to be previous menu. Press "BLUE" key to Save.
Scan
Select the satellite you want to scan by using the ▲▼ keys .
Press the "OK" key and Scan will begin. 7-Segment will display "SCAΠ".
1) Network
If you want to have all other
Transponder information, you need to
Select network ' On '.
2) Search Mode
You can select ALL / FTA option
mode in each satellite by
Using the the ◀ ▶ keys.
STB will automatically search all TV/Radio channels from a satellite and save them
into the Channel List.
You can see the progressive status of channel searching. Press the Red or Exit
key to stop Channel Search.
When the Channel Search is completed, the result will be saved and the first
channel of the searched ones will be displayed.
Notice : Please wait for the receiver to process all the channels, and note
that the "Channel Search" procedure may take a few minutes.
18