SAB Explorer PVR SC User Manual page 21

Digital satellite receiver
Table of Contents

Advertisement

Menu Guide :
Installation
◈ Download Software
To maintain the STB up-to-date, you can upgrade the DB of the STB via other STB
and personal computer.
New versions of DB may include latest information on Satellites and transponders.
1.STB Upgrade
You can select "On" if you want to
upgrade the software via satellite
directly
2.STB Auto Upgrade
You can select "On" if you want to
upgrade the software via satellite
automatically.
How to download Software(Set to Set)
1. Connect two STBs using RS232C cable.
2. The receiver which receives database select a " Receive DB from STB" mode
3. The receiver which sends database select a "Send DB to STB" mode.
4. Press the "OK" key
Notice : While downloading, don't turn off the STB. If the power turns off, turn on
the STB and restart the downloading process again.
◈ Factory Reset
This mode is to restore the factory reset values.
After selecting 'Factory Reset', A warning message will be displayed.
If you press the "OK" key, all preset information will be formatted.(default vale: 0000)
NOTICE: This causes your previous settings to be deleted and default setting
to be loaded.
21

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Explorer PVR SC and is the answer not in the manual?

Table of Contents