Midnight Mode; Panorama Mode; Dimension Mode; Center Width Mode - Kenwood KRF-V6300D Instruction Manual

Midnight mode

Midnight mode
¶ Dolby Digital and DTS mode only
When watching movies at night, you might not be able to raise
the volume as loud as normal. Midnight mode compresses the
dynamic range of previously specified heavy sound passage of
the Dolby Digital and DTS mode sound track (like scenes with
sudden increases in volume) to minimize the difference in volume
between the scenes with heavy sound passage and scenes with
normal sound passage. This makes it easy to hear all of the sound
track, even when listening at low volumes.
œ Press [SOUND] repeatedly until "NIGHT" appears
on the display.
This can be selected only if "CD/DVD", "DVD/6CH" or
"VIDEO2" is selected as the source and the listen mode
is set to "DOLBY DIGITAL" or "DTS".
∑ Use [MULTI CONTROL ∞/5] to select the "ON" or
"OFF" setting.
• Some Dolby Digital or DTS software may not be compatible with
the Midnight mode.

Panorama mode

Panorama mode
¶ Pro Logic IIx Music and Pro Logic II Music mode only
When listening to music, you will be able to enjoy the
"wraparound" sound effect when you adjust the panorama mode.
œ Press [SOUND] repeatedly until "PANORAMA"
appears on the display.
The "PANORAMA" setting indication scrolls across the
display.
"PANORAMA" will be scrolled from right to left.
∑ Use [MULTI CONTROL ∞/5] to select the "ON" or
"OFF" setting.
1 "ON" : PANORAMA mode is ON.
2 "OFF" : PANORAMA mode is OFF.

Dimension mode

Dimension mode
¶ Pro Logic IIx Music and Pro Logic II Music mode only
When listening to music with certain recordings, you will also
be able to achieve a suitable balance from all the speakers by
adjusting the dimension mode.
œ Press [SOUND] repeatedly until "DIMENSION"
appears on the display.
The "DIMENSION" indication scrolls across the display.
∑ Use [MULTI CONTROL ∞/5] to adjust the
soundfield towards the rear or the front.
Soundfield is adjusted towards the front.
Soundfield is in neutral position.
Soundfield is adjusted towards the rear.

Center Width mode

Center Width mode
¶ Pro Logic IIx Music and Pro Logic II Music mode only
Center Width adjustment allows you to enjoy an enhanced
sound when listening to music through center image from only
center speaker, or left and right speakers or various combinations
adjustments.
œ Press [SOUND] repeatedly until "CENTER WIDTH"
appears on the display.
The "CENTER WIDTH" indication scrolls across the
display.
∑ Use [MULTI CONTROL ∞/5] to adjust the left-
center-right output.
Center image will be heard from Center speaker only.
Center image will be heard from Left and Right
speakers only.
• When in other positions, center image from Center speaker, Left
and Right speakers can be heard simultaneously with various
combinations.
• When the center speaker is switched OFF, this mode will not be
effective.
41
English