Getting Into The Setup Mode; Speaker Setup ("Sp Setup") - Kenwood KRF-V6300D Instruction Manual

Speaker setup ("SP SETUP")

This sets up the speakers according to the speaker system in
use. Speaker setup is required every time the speaker system is
changed.
œ See <Getting into the setup mode> (™) and
select "SP SETUP".
∑ Use [MULTI CONTROL ∞/5] to select the subwoofer
setting.
Speaker Display
"SUBW ON"
Subwoofer
"SUBW OFF"
é Press [SETUP].
® Repeat steps ∑ – é for the rest of the speaker
setting.
Speaker Display
"FRNT LRG"
Front speaker
"FRNT NML"
"CNTR NML"
Center speaker "CNTR LRG"
"CNTR OFF"
"SURR NML"
Surround speaker "SURR LRG"
"SURR OFF"
"BS LRG"
"BS NML"
"BS OFF"
Surround Back
speaker
"BS L/R"* 1
"BS MONO"*
"RMX ON"
Subwoofer re-
mix* 2
"RMX OFF"
1
* This selection is available when either "BS LRG" or "BS NML" is
selected.
* 2 The function for adding the bass of other channels to the
subwoofer channel according to the speaker setup.
† Go to the next setting, "TEST TONE".
If you wish to exit the setup mode, see <To exit the
setup mode> ™.
Setting
With Subwoofer
Without Subwoofer
Setting
Large size front speaker
Average size front speaker
Average size center speaker
Large size center speaker
No center speaker is connected.
Average size surround speaker
Large size surround speaker
No surround speaker is connected.
Large size surround back speaker
Average size surround back speaker
No surround back speaker is connected.
Left and Right Surround Back speakers are
connected.
Only one Surround Back speaker is
1
connected.
Subwoofer re-mix is on.
Subwoofer re-mix is off.
• Reference for speaker size
"LRG" : A speaker with a sufficient bass reproduction capability (a
speaker with a large woofer or a large cabinet size).
"NML" : A speaker with a lower bass reproduction capability than
the "LRG" speakers (the bass frequencies will be output
from the speakers set to "LRG" and the subwoofer).
If you cannot identify the size of a speaker, it is recommended to
set it to "NML".
• When "SUBW OFF" is selected, the front speakers are
automatically set to "FRNT LRG".
• For "FRNT LRG" selection, no sound will be heard from subwoofer
even it is set to ON. However, if you select "RMX ON", you will be
able to hear sound from the subwoofer.
• When in STEREO mode, the sound goes directly to front speakers.
• If "FRNT NML" is selected, "LRG" cannot be selected for the other
speakers.
• If "CNTR NML" or "CNTR OFF" is selected, "SURR LRG" cannot be
selected.
• If "SURR OFF" is selected, no surround back speaker can be
selected.
• "BS LRG" cannot be selected unless "SURR LRG" is selected.
• If "BS MONO" is selected, surround back signal can only be output
at the SURROUND BACK L terminal.
23
English