AUDIO VIDEO SURROUND RECEIVER KRF-V7030D KRF-V6030D KRF-V5030D KRF-V4530D INSTRUCTION MANUAL KENWOOD CORPORATION This instruction manual is used to describe multiple models listed above. Model availability and features (functions) may differ depending on the country and sales area. B60-4602-00 (EN)
Keep this manual handy for future reference. Accessories AM loop antenna (1) FM indoor antenna (1) For KRF-V7030D and KRF-V6030D Batteries (R6/AA) (2) Remote control unit (1) RC-R0610 For KRF-V5030D and KRF-V4530D...
Before applying the power Contents Maintenance of the unit When the front panel or case becomes dirty, wipe with a soft, dry Caution : Read the pages marked carefully to ensure cloth. Do not use thinner, benzine, alcohol, etc. for these agents may safe operation.
How to use this manual Special features True home theater sound The manual covers the KRF-V7030D, KRF-V6030D, KRF-V5030D, and This receiver incorporates a wide variety of surround modes to bring you KRF-V4530D. Items such as functions, number of jacks, and remote maximum enjoyment from your video software.
POWER A SPEAKERS B BAND AUTO MEMORY DOWN S-VIDEO AV AUX L – AUDIO – R PHONES For KRF-V7030D SPEAKER MUTE KRF-V5030D, KRF-V4530D 1 POWER key ! SPEAKER key ∞ 3 STEREO indicator Use to turn the main power ON/OFF.
Names and functions of parts Remote control unit (RC-R0610) (KRF-V7030D/V6030D) POWER POWER VCR/CDR RETURN LSTN.M DISPLAY MENU SET UP SOUND P.CALL P.CALL MULTI CONTROL TUNING ENTER BAND A/B+100 AUTO & B.BOOST DISC SKIP RECEIVER TITLE There are some cases in which keys (or INPUT SEL.
Names and functions of parts Remote control unit (RC-R0510) (KRF-V5030D/V4530D) POWER POWER RECEIVER MENU RETURN TITLE SET UP SOUND LISTEN MODE DISPLAY P.CALL P.CALL MULTI CONTROL ENTER BAND TUNING & A/B+100 AUTO BASS BOOST DISC SKIP PHONO CD/DVD TUNER MD/TAPE VIDEO1 VIDEO2 MUTE VOLUME...
(S/P DIF, AES/EBU, or TosLink) of the CD, LD or DVD player. The only audio product model incorporating the DTS Digital Surround decoder is the KRF-V7030D. VIDEO2/MONITOR VIDEO 2/MONITOR jacks (for KRF-V6030D/V5030D/V4530D)
Video Inputs (Yellow RCA pin cord) • Install the KRF-V7030D/V6030D/V5030D/V4530D on the top of the system. • Do not place any objects impairing heat radiation onto the top of unit. • Leave a space around the unit (from the largest outside dimension A video component with digital audio outputs should be con- including projection) equal or greater than, shown below.
Setting up the system Digital connections Input mode settings CD, DVD, VIDEO2 and VIDEO3 (KRF-V7030D only) inputs each The digital in jacks can accept DTS, Dolby Digital (AC-3), or PCM signals. include jacks for digital audio input and analog audio input.
Setting up the system Connecting to the AUX IN jacks Connecting the antennas (KRF-V7030D only) AM loop antenna The supplied loop antenna is for use indoors. Place it as far as possible from The AUX IN jacks are convenient for connection of video components the receiver, TV set, speaker cords and power cord, and adjust the direction such as a camcorders and video games.
• Once you finish making the system connections, be sure to register the appropriate setup code for each component. [SL16] • If you own remote controllable KENWOOD audio components that are Receiver not compatible with system control, registering the setup code en-...
After confirming the speaker impedance indications printed on the rear on making connections panel of the receiver, connect speakers with matching impedance to the KRF-V7030D/ ratings. Using speakers with a rated impedance other than that indi- V6030D when making cated on the rear panel of the receiver could result in malfunctions or connections to the KRF- damage to the speakers or receiver.
Setting up the system Preparing the remote control Speaker placement Loading the batteries 2 Insert the batteries. 1 Remove the cover. Center speaker Subwoofer 3 Close the cover. Front speaker Listening position Surround speaker Front speakers : Place to the front left and right of the listening position. Front speakers are required for all surround modes.
Preparing for surround sound Speaker settings 6 Use the MULTI CONTROL to select the appropriate center speaker setting. To enable you to obtain optimum enjoyment from the receiver’s listening If you selected “LRG” as the front speakers setting. modes, make sure to complete the speaker settings (subwoofer, front, 1 CNTR LRG (large): A large center speaker is connected to center, and surround speakers) as described below.
1 foot (0.3 m) increments. If you have selected a component connected to the CD, DVD, VIDEO2, or VIDEO3 (KRF-V7030D only) jacks, make sure that the input mode 3 Press the SET UP key. setting is correct for the type of audio signal to be used.
• This key does not function when the receiver is in the sound quality or ambience effects adjustment mode. Switching back to the previous setting Selecting VIDEO 2/MONITOR (except for KRF-V7030D) Press the B. BOOST (BASS BOOST) key again. Depending on the component connected to the VIDEO 2/MONITOR jacks, select either the “VIDEO 2”...
TUNED DOWN MIX Listening with headphones 2 Use the INPUT SELECTOR knob to select a source other than 1 (KRF-V7030D/V6030D) “MD/TAPE.” Press the SPEAKERS A or B key so that the speaker indicator goes off. 3 Start playback on the cassette deck connected to the MONITOR...
Recording Recording video Recording music in M-REC MODE 1 Use the INPUT SELECTOR to select the video source (other than “VIDEO1”) you want to record. DIMMER 2 Set the video deck connected to VIDEO 1 to record. • Select the REC MODE to record a digital input source. 3 Start playback, then start recording.
Listening to radio broadcasts Tuning (non-RDS) radio stations Using RDS (Radio Data System) Radio stations can be classified into RDS (Radio Data System) stations RDS is a system that transmits useful information (in the form of digital and other stations. To listen to or store RDS stations in the preset memory, data) for FM broadcasts along with the broadcast signal.
Listening to radio broadcasts Using the DISPLAY key Presetting RDS stations (RDS AUTO MEMORY) This function automatically stores up to 40 RDS stations in the preset memory. In order to use the PTY function, the RDS stations must be stored in the preset memory using the RDS AUTO MEMORY function.
Listening to radio broadcasts Presetting radio stations manually Enter the number of the preset you want to receive (up to The RDS auto memory function assigns preset numbers to RDS stations "40"). starting from preset number "1". Therefore, be sure to execute the RDS auto memory function before using the following operations to manually store AM stations and other FM stations, and RDS stations.
Listening to radio broadcasts Tuning by program type (PTY search) This function lets you set the tuner to automatically search for stations Press the PTY key to start searching. which are currently broadcasting the type of program (genre) you want to listen to.
5.1 channel Dolby Digital (AC-3) surround sound, this receiver lets you enjoy Dolby Digital (AC-3) DTS (KRF-V7030D only) (and Dolby Surround) program sources, even if you connect only the front speakers. ("Speaker placement") The DTS multi-channel audio format is available on CD, LD and DVD software.
The DTS compatible models can reproduce a CD, DVD, or LD carrying Dolby 3 Stereo the DTS mark. (KRF-V7030D only) Dolby 3 Stereo is available for systems that do not have surround speakers. When in the Dolby 3 Stereo mode, the surround information DOLBY DIGITAL can be used when playing DVD or LD software bearing is redirected to the front left and right speakers.
Ambience effects DVD 6-channel playback When the DTS signal is input: (KRF-V7030D only) (The DTS indicator lights up.) Using a DVD player or the like equipped with six (5.1) output channels and 1DTS: DTS surround the receiver, you can enjoy surround sound playback.
Ambience effects Convenient functions 2 Use the MULTI CONTROL to select the on or off setting. MULTI CONTROL KRF-V6030D/ AUTO SOUND DIGITAL AUTO TI.VOL PRO LOGIC S.DIRECT MEMO V5030D/ CLIP MUTE DIMMER STEREO MONITOR RDS EON V4530D DOWN MIX TUNED NEWS •...
In case of difficulty Resetting the Microcomputer With the power cord plugged in, turn the POWER key If the microcomputer may malfunction (unit cannot be operated, OFF. Then, while holding down the ON/STANDBY key, or shows an erroneous display) if the power cord is unplugged press POWER.
MONITOR IN (VIDEO2/MONITOR) ..... 200 mV / 47 k Notes 1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. 2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
Remote control for KRF-V7030D and KRF-V6030D only Remote Control Instruction Manual Preset Remote Control Quick Start Guide Remote Control Instruction Manual Quick start guide ..........31 Getting the most from your remote control ....33 Setup code chart ..........34 In case of difficulty ..........
Quick Start Guide Register the setup codes for your audio and video components Step 1 If the component does not respond when you try to control it, return to step 2 and enter the next setup Look up the setup code for the component you want code on the list.
Note • Example: Press "805" to register a DVD player made by KENWOOD. Be sure to point the remote control at the remote sensor on the receiver • If you push an invalid key, the remote will exit the setup mode.
In case of difficulty Remote control unit Symptom Cause Remedy Certain inputs cannot be selected using the • No setup codes registered at for the respective • Register a setup code at the respective input(s). remote control. input(s). Remote control operation is not possible. •...
Remote operation of other components Refer to the following for the type of remote control operations available for each component. The setup code for each component must be entered beforehand. • When pressing keys in succession, press each key firmly and be sure to 1 Use the input selector keys or source POWER keys to select wait at least 1 second before pressing the next key.
Remote operation of other components TV operations ENTER BAND INPUT SEL. MD/TAPE TUNER CHANNEL MUTE VOLUME AUTO TV SEL. AV AUX VIDEO3 CHANNEL % VOLUME % ENTER INPUT SEL. MUTE (Mute) (Enter) (Channel +) (Volume +) (Input selector) CHANNEL ﬁ VOLUME ﬁ...
Remote operation of other components CDR operations ENTER BAND MENU P.CALL P.CALL MD/TAPE SOUND SET UP CHANNEL MULTI CONTROL AUTO AV AUX % (Cursor ») CHANNEL % ENTER (Enter) MENU ﬁ (Cursor «) (Menu) (Channel +) (OSD menu) CHANNEL ﬁ @ (Cursor |) # (Cursor \) (Channel –)