Kenwood KRF-V6300D Instruction Manual page 16

Setting up the system
Connecting video players (COMPONENT VIDEO connection)
Connecting a DVD player is described as an example.
1 Connect the audio line : See <Connecting a DVD player> @ and make the audio connection.
2 Connect the video line and TV monitor as shown below.
HDMI
MONITOR OUT DVD/6CH IN VIDEO 2 IN
OPTICAL OPTICAL COAXIAL
CD/DVD
AUDIO
DVD/6CH IN PLAY IN
SUB WOOFER CENTER AUX
MD/TAPE
SURROUND
CD/DVD
FRONT
VIDEO2 VIDEO1
R L R L R
• Connect the same way for the VIDEO 1 and VIDEO 2 terminals.
• If the DVD player has 6 channel output, connecting to DVD/6CH IN terminals is possible. (<Connecting a DVD player with multichannel audio
output terminal> @)
• If some of the video equipment are connected to the COMPONENT terminals and the rest are connected to the normal (composite) VIDEO
terminals, make sure to connect the TV to the MONITOR OUT terminals of both COMPONENT VIDEO and VIDEO.
• Depending on the type of TV, it may be necessary to switch the input of the TV according to the type of video input (COMPONENT input or
VIDEO (COMPOSITE) input). Refer to the instruction manual of your TV for more information.
16
KRF-V6300D
VIDEO COMPONENT VIDEO
DVD/6CH VIDEO 2 MONITOR
IN IN OUT VIDEO 1 IN
DIGITAL IN
VIDEO 1 OUT DVD/6CH VIDEO 1 VIDEO 2
VIDEO 2 DVD/6CH S–VIDEO IN
PRE OUT ANTENNA FRONT SPEAKERS (6–16 )
REC OUT SPEAKER B SPEAKER A
SUB
FM 75
WOOFER
MD/TAPE +
SURROUND
GND
BACK L/
MONO
‒
AM
SURROUND
BACK R
R L R
VIDEO1
L R L
RED
COMPONENT VIDEO
CR
CB
Y
MONITOR
OUT
SURROU
CENTER
DVD/6CH VIDEO 1
IN
L
WHITE GREEN
VIDEO OUT
DVD player
CR
CB
Y
VIDEO 2 MONITOR
OUT
COMPONENT VIDEO
MONITOR IN
TV Monitor