Dolby:3 Stereo Mode Csc Ooo Eee Ett Asis Ed; Dolby 3 Stereo Ag Iustiiient.cisatiiviccacodtansavenitiaiediation; Dolby 3 Slereo: Playhdek.c - Kenwood KR-V7050 Instruction Manual

Audio video stereo receiver
Hide thumbs Also See for KR-V7050:
Table of Contents

Advertisement

Dolby 3 STEREO Mode
The Dolby 3 STEREO provides a active center channel
to produce a better, stable center image. This mode pypass key
can be used when listening to stereo video program
and music or when surround listening or surround TEST TONE
system set-up not possible.
— Dolby 3 STEREO adjustment
Set the Dolby 3 STEREO mode.
3 STEREO
Lights up
Remote control unit
Select the center mode.
CENTER
MODE
Every time the key is pressed, the
Remote
center mode is switched.
control
unit only
NORMAL © WIDE BAND
e Set the center mode to NORMAL
if using a small
center speaker, or set to WIDE
BAND
if using a me-
dium-sized or larger speaker.
3
Adjust the center speaker volume.
@) Press the TEST TONE key.
A buzzing sound
comes from the
speaker. It is
switched every one
and half second for
Remote
each other.
control
unit only
e Press at the listening position.
e@ When at 3 stereo sound is produced in the sequence:
|
LEFT — CENTER —- RIGHT (REAR not available with 3
stereo mode.)
@) Adjust the volume.
e And adjust so that the level of the
center speaker is equal to that of
CENTER
:
LEVEL
the left and right speakers.
[VW]
e The rear level adjustment
is in-
;
valid.
Remote control unit
4
Stop generating the test tone.
{65:
Press the key again.
Remote control unit only
28 KR-V7050 (En)
mo) oe)
LBY
BYPASS
PHO LOGIC 3 STEREO DSPLOGIC
DSP
DOLBL 3
STEREO key
ENTE
tone
MODE"
PHONO
CD
key
VIDEO 2
VIDEOQ1
TAPE2
TAPE1
TUNER
PRESENCE
DELAY
CENTER
LEVEL
TIME
LEVEL
CENTER LEVEL key
H@ Dolby 3 STEREO playback
Set the Dolby 3 STEREO mode.
3 SPER 0
ac
STEREO
Lights up
Remote control unit
Select the center mode.
CENTER
Every time the key is pressed, the
MODE
center mode is switched.
NORMAL & WIDE BAND
Remote control unit only
e Set the center mode
to NORMAL
if using a small
center speaker, or set to WIDE BAND if using a me-
dium-sized or larger speaker.
Play a stereo software
program
or a
Dolby surround program.
Adjust the volume and tone.
VOLUME
CONTROL
4418
a6
2 3
a 1s
Main unit
To return to normal stereo playback.
BYPASS
Goes off
Remote control unit
CENTER MODE

Advertisement

Table of Contents
loading

Table of Contents