Connecting The Antennas - Kenwood KRF-V6300D Instruction Manual

Connecting the antennas

The broadcast reception cannot be made unless the antennas are connected. Connect the antennas correctly as instructed below.
FM indoor antenna
AM loop antenna
AM loop antenna AM loop antenna
Place the supplied loop antenna as far as possible from the
receiver, TV set, speaker cords and power cord. Adjust the
direction for best reception.
œ Attach to the stand.
∑ Push the lever.
é Insert the antenna cord.
® Release the lever.
† Place the antenna and adjust the direction.
HDMI
MONITOR OUT DVD/6CH IN VIDEO 2 IN
DIGITAL IN
OPTICAL OPTICAL COAXIAL
CD/DVD VIDEO 2 DVD/6CH
AUDIO PRE OUT
DVD/6CH IN PLAY IN REC OUT
SUB WOOFER CENTER AUX
MD/TAPE MD/TAPE
SURROUND
CD/DVD
FRONT
VIDEO2 VIDEO1 VIDEO1
R L R L R L R L
VIDEO COMPONENT VIDEO
DVD/6CH VIDEO 2 MONITOR
IN IN OUT VIDEO 1 IN
VIDEO 1 OUT DVD/6CH VIDEO 1 VIDEO 2 MON
S–VIDEO IN
ANTENNA FRONT SPEAKERS (6–16 )
SPEAKER B SPEAKER A
SUB
FM 75
WOOFER
+
SURROUND
GND
BACK L/
MONO
‒
AM
SURROUND
BACK R Use an antenna
R L R
adapter
RED WH
(commercially
available)
ANTENNA
FM 75
GND
AM
FM indoor antenna FM indoor antenna
The supplied indoor antenna is for temporary use only. For stable
signal reception we recommend using an outdoor antenna.
Disconnect the indoor antenna when you connect one outdoors.
œ Insert the antenna cord.
∑ Fix the antenna on the wall.
FM outdoor antenna FM outdoor antenna
Lead the 75Ω coaxial cable connected to the FM outdoor antenna
into the room and connect it to the FM 75Ω terminal.
FM outdoor antenna
(commercially available)
English
17