Digital Connections - Kenwood KRF-V8080D Instruction Manual

Setting up the system

Digital connections

The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD)
format digital signals.
If you have connected any digital components to this model, be sure to read the "Input mode settings" section carefully.
COAXIAL
VIDEO
2
DVD/
6CH
COAXIAL
DIGITAL
OUT
(AUDIO)
RF digital demodulator
(Commercially available)
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the RF digital demodulator (Commercially available).
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of this model.
Connect the video signal and analog audio signals to the VIDEO 2 or VIDEO 3 jacks. (See "Connecting video components".)
12
EN
OPTICAL OPTICAL
CD/DVD VIDEO 3
DIGITAL IN
Optical fiber cable
OPTICAL DIGITAL OUT (AUDIO)
COAXIAL DIGITAL OUT (AUDIO)
DOLBY DIGITAL RF
OUT (AUDIO)
OPTICAL DIGITAL OUT (AUDIO)
Optical
fiber cable
DVD Player or CD Player
Component with DTS,
Dolby Digital, or PCM
OPTICAL DIGITAL OUT
Connect the video signal and
analog audio signals to the VIDEO
3 jacks.
(See "Connecting video compo-
nents".)
Component with DTS,
Dolby Digital, or PCM
COAXIAL DIGITAL OUT
Connect the video signal and
analog audio signals to the VIDEO
2 jacks.
(See "Connecting video compo-
nents".)
PCM OUT
LD Player
8
!
!