Digital Connections - Kenwood KRF-V5050D Instruction Manual

Digital connections

12
The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS,
Dolby Digital, or standard PCM (CD) format digital signals.
If you have connected any digital components to the receiver, be sure to read the "Input mode settings" section
carefully.
COAXIAL DIGITAL OUT (AUDIO)
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D).
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.
Connect the video signal and analog audio signals to the VIDEO2/MONITOR jacks. (See "Connecting video components".)
S VIDEO PLAY IN REC OUT PLAY IN
L
MONITOR
OUT DVD VIDEO 1
R
A
R L
DVD
VIDEO 2/MONITOR CD/DVD
COAXIAL OPTICAL
DIGITAL IN
Optical fiber
cable
RF digital
demodulator
(DEM-9991D)
(sold separately)
DOLBY DIGITAL
RF OUT (AUDIO)
PCM OUT
B
R L
R L
C
OPTICAL DIGITAL OUT (AUDIO)
CD player
COAXIAL DIGITAL OUT (AUDIO)
Component with a DTS,
Dolby Digital, or PCM
COAXIAL DIGITAL OUT
Connect the video signal and analog
audio signals to the VIDEO 2 jacks.
(See "Connecting video components".)
LD player
Setting up the system
8
0