Controls And Indicators - Kenwood KR-V80 Instruction Manual

Controls and indicators
Remote sensor
PRO -LOGIC key BAND key
STAND BY indicator
SPEAKER A, B indicators
TUNING key
BY PASS key
CENTER MODE key
LINE STRAIGHT, CD DIRECT indicators
3 STEREO key REAR LEVEL keys + 10 key
POWER key CENTER LEVEL VOLUME CONTROL
keys with point indicator
KENWOOD
¥DLUME FONTROL
—_—_—_—_—_—_— eee ee ee ee eee
FOWER
omsatann er
; 38 eS ip
SPEAKERS
[MONTOm)
VIOEO 2 | wOEG rope z | rap Ture aug LINE
LOUDNESS BALANCE
HIGH PERFORMANCE O+GITAL SURROUND
SPEAKER A and 8B keys
A,.BOFF @ This position silences all speakers to permit pri-
vate use of headphones.
AON @ Activates speakers connected to the SPEAK-
ERS A terinals on the rear panet.
BON @ Activates the speakers connected to the
SPEAKERS B terminals on the rear panel.
A.BON @ Activates the speakers connected to the
SPEAKERS A and B terminals simultaneously.
SPEAKERS
A
O
©)
A SPEAKERS B
STAND BY mode of POWER switch
When the power cord of this system is plugged into an Ac out-
let, the STAND BY indicator lights up regardless of the ON/OFF
setting of the POWER switch. This indicates that a small
amount of current is being supplied to the unit to back up the
memory contents. This mode is referred to as the Stand By
mode. While the STAND BY indicator is lit, the power of the
system can be switched ON/OFF from the remote control unit.
@ When both of SPEAKERS A and 8B keys are ON, pressing the
PRO LOGIC key or 3 STEREO key switches the SPEAKERS
key setting to A ON alone. If the B key is pressed now, the
SPEAKERS key setting will be switched to B ON alone.
10 kr-vs030 (En)