Controls And Indicators - Kenwood KR-897 Instruction Manual

TAPE 2 indicator
N.B. circuit
indicator
Broadcast band
indicators
KR4997/V.R_797 [_]
OPOWER key
Press to switch the power ON and OFF.
O STANDBY indicator
OSRS 3D indicator
Lights when the SRS 3D system is ON.
OSPEAKERS indicator
Lights when the speakers are ON.
O STEREO key -_
Press to turn the surround mode OFF,
O DOLBY PRO LOGIC key -_
O DOLBY 3 STEREO key -_
QSRS 3D key -_
OINPUT SELECTOR knob
Rotate to select the input source.
@VOLUME CONTROL knob
@ PHONES jack
Plug headphones into this jack,
@AUTO key
Press to select the tuning mode from the
auto tuningand manual tuning modes.-_
Press and hold the AUTO key for more than
2 seconds to switch the TAPE1 display to
another input display. -_
_SPEAKERS key
Press to turn the speakers ON and OFF
DIRECT key -_
Press when tuning a broadcast station by
entering the digits of its frequencies.
MEMORY key -_
Press when registering a broadcast sta-
tion in the preset memory•
O Nurneric keys (1 to 0, +10)
@BAND key -_
Press to switch the broadcasting band.
@DISPLAY key
Press to switch the displayed information
between the surround mode display and
input selector display.
Press and hold the DISPLAy key for more
than 2 seconds to switch the display brigh t-
ness,
@TUNING keys ( V, A) -_
Press to select a radio station•
@TAPE 2 MONITOR key -_
Press to "monitor the sound being re-
corded, etc,
_N.B. key -_
Press to compensate for the insuffi-
ciency in the base sound.
OP.CALL keys ( v, A ) -I_,
Press to select one of the preset sta-
tions.
@SOURCE DIRECT key -13_
Press to listen to the source sound with
a higher sound quality.
About the STANDBY indicator
This unit has a STANDBY indicator, the lighting of which indicatesthat a small amount of current is supplied to back up the internal memory of the unit.
This status is referred to as the standby mode of the unit. In this mode. the power of the unit can be switched ON from the remote control unit.
When the unit is not to be used for a long period of time. unplug the power cord from the power outlet.