Controls And Indicators - Kenwood KR-V9030 Instruction Manual

Controls and indicators
Remote control
light receptor
BYPASS key ipUT LEVEL keys
O00 PRO-LOGIC key
LINE STRAIGHT key TUNING keys
POWER key
003 STEREO key CD DIRECT key +10 key
VOLUME CONTROL
with point indicator
STAND BY
indicator
soceted Salil ECEIVER KR-VSO: ae
BAND key
KENWOOD
Fl
BYPASS _UPROLOGIC [3 STEREO SP. = NeuT ceven LINE STRAIGHT _ cD DIRECT BAND
VOLUME CONTROL
PHONES:
PHONES jack
Input select keys Numeric keys BALANCE control knob
LOUDNESS control knob
SPEAKERS A and B switches
A, B OFF -— This position silences all speakers to permit private use
of headphones.
AON — Activates speakers connected to the SPEAKERS A ter-
minals on the rear panel.
Before operating the unit, remove packing material as
BO a i
N Activates the speakers connected to the SPEAKERS ahown felow.
B terminals on the rear panel.
A, BON — Activates the speakers connected to the SPEAKERS
A and B terminals simultaneously.
SPEAKERS
A
STAND BY mode of POWER switch
When the power cord of this system is plugged into an AC outlet,
the STAND BY indicator lights up regardless of the ON/OFF setting
©
© If you press the [1] PRO-LOGIC key, D0 3 STEREO key or DSP of the POWER switch. This indicates that a small amount of current
key when both the A and B SPEAKERS switches are ON, the unit is being supplied to the unit to back up the memory contents. This
will automatically switch to A so that sound is heard only from the mode is referred to as the Stand By mode. While the STAND BY indi-
A speakers. Pressing the B key at this time will switch the sound cator is lit, the power of the system can be switched ON/OFF from
So that it is heard from the B speakers only.
the remote control unit.
12. kR-vg030 (En)