Choose Your Language; Set The Lcd Contrast; Select Language - Brother DCP-8085DN Quick Setup Manual

7

Choose your language

a
After turning the power switch on, the LCD
shows:

Select Language

a English
Français
b Deutsch
Select ab or OK
Press or
and press OK.
b
The LCD prompts you to confirm your
selection.
Select Language
English
1.Yes
2.No
Enter Number
If the LCD shows the correct language, press
1.
—OR—
Press 2 to go back to step a to choose the
language again.
Note
• If Scanner Locked appears on the LCD,
immediately release the scanner lock and
press Stop/Exit. (See Release the scanner
lock on page 4.)
• If you have set the wrong language, you can
change the language from the control panel
menu of the machine. (Menu, 1, 0)
to choose your language
8

Set the LCD contrast

(If needed)
a
Press Menu.
b
Press 1.
c
Press 5.
d
Press to increase the contrast.
—OR—
Press to decrease the contrast.
Press OK.
e
Press Stop/Exit.
5