Check The Print Quality; Choose Your Language; Fax Only - Brother MFC-J220 Quick Setup Manual

f
Take care to match the colour of the lever with
the cartridge colour.
g
Install each ink cartridge in the direction of the
arrow on the label.
h
Gently push the ink cartridge until it clicks. After
all the ink cartridges are installed close the ink
cartridge cover.
5

Check the print quality

a
When the preparation process has finished, the
LCD shows Set Paper and Press Start.
Press Colour Start.
b
Check the quality of the four colour blocks on
the sheet. (black/yellow/cyan/magenta)
c
If all lines are clear and visible, press 1 (Yes)
on the dial pad to finish the quality check and
go to step 6.
If you can see missing short lines, press 2 (No)
on the dial pad and follow the steps on the
LCD.
6

Choose your language

a
Press Menu.
b
Press a or b to select Initial Setup.
Press OK.
c
Press a or b to select Local Language.
Press OK.
d
Press a or b to select your language.
Press OK.
e
Press Stop/Exit.
4
7
Choose a Receive Mode
There are four possible receive modes: Fax Only,
Fax/Tel, Manual and External TAD.
Do you want to use the telephone features of your
machine (if available) or an external telephone or
external telephone answering device connected on the
same line as the machine?
Yes
Are you using the voice message
function of an external telephone
answering device?
No
Do you want the machine to
answer fax and telephone calls
automatically?
Yes
No
Yes
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Receive Mode.
Press OK.
d
Press a or b to choose the receive mode.
Press OK.
e
Press Stop/Exit.
No

Fax Only

Your machine
automatically answers
every call as a fax.
Fax/Tel
Your machine controls
the line and
automatically answers
every call. If the call is
not a fax, the telephone
will ring for you to pick
up the call.
Manual
You control the
telephone line and must
answer every call
yourself.
External TAD
Your external telephone
answering device (TAD)
automatically answers
every call. Voice
messages are stored
on the external TAD.
Fax messages are
printed.