Brother DCP-8085DN Quick Setup Manual page 10

Hide thumbs Also See for DCP-8085DN:
Table of Contents

Advertisement

USB
For USB Interface Users
®
(Mac OS
X 10.3.9 or greater)
12
Before you install
a
Make sure your machine is connected to the
power and your Macintosh
be logged on with Administrator rights.
13
Connect the USB cable
IMPORTANT
• DO NOT connect the machine to a USB port
on a keyboard or a non-powered USB hub.
• Connect the machine directly to your
®
Macintosh
.
a
Remove the label covering the USB interface
connector.
b
Connect the USB cable to the USB connector
on the machine marked with the
Then connect the cable to your computer.
10
®
is ON. You must
symbol.
Macintosh
14
Install MFL-Pro Suite
a
Put the supplied CD-ROM into your CD-ROM
drive.
b
Double-click Start Here OSX to install.
c
The Brother software will search for the Brother
device. During this time the following screen
will appear.
d
Choose the machine from the list, and then
click OK.
e
When this screen appears, click OK.
The installation of MFL-Pro Suite is now
complete.
Go to step 15 on page 10.
15
Install
Presto! PageManager
When Presto! PageManager is installed OCR
capability is added to Brother ControlCenter2. You
can easily scan, share and organize photos and
documents using Presto! PageManager.
a
Double-click Presto! PageManager and follow
the on-screen instructions.
The installation is now
Finish
complete.
®

Advertisement

Table of Contents
loading

Table of Contents