Check The Print Quality; Choose Your Language - Brother MFC-5895CW Quick Setup Manual

f
Take care to match the colour of the lever with
the cartridge colour.
g
Install each ink cartridge in the direction of the
arrow on the label.
h
Gently push the ink cartridge until it clicks. After
all the ink cartridges are installed close the ink
cartridge cover.
5

Check the print quality

a
.
Set Paper and Press
Start
Press Colour Start.
b
Check the quality of the four colour blocks on
the sheet. (black/yellow/cyan/magenta)
c
If all lines are clear and visible, press 1 (Yes)
on the dial pad to finish the quality check.
If you can see missing short lines, press 2 (No)
on the dial pad and go to d.
d
The LCD asks you if the print quality is OK for
black and colour. Press 1 (Yes) or 2 (No) on
the dial pad.
e
Press 1 (Yes), the machine will then start
cleaning the colours.
f
After cleaning is finished, press Colour Start.
The machine starts printing the Print Quality
Check Sheet again. Go back to b.
4
6

Choose your language

You can select the display language of your LCD
messages.
a
Press Menu.
b
Press a or b to select Initial Setup.
Press OK.
c
Press a or b to select Local Language.
Press OK.
d
Press a or b to select your language.
Press OK.
e
Press Stop/Exit.