Connect The Power Cord; Install The Ink Cartridges; Choose Your Language - Brother DCP-J4110DW Quick Setup Manual

3

Connect the power cord

WARNING
The machine must be fitted with an earthed
plug.
IMPORTANT
DO NOT connect the USB cable yet (if you are
using a USB cable).
a
Connect the power cord.
(Example for UK)
NOTE
The Warning LED on the control panel will stay on
until you have installed the ink cartridges.
4

Choose your language

a
Press your language.
b
Press Yes or No.
NOTE
If you set the wrong language, you can change it
after setting the date and time. (uuAdvanced
User's Guide: Changing the Touchscreen
language)
4
5

Install the ink cartridges

CAUTION
If ink gets in your eyes, wash it out with water at
once and call a doctor if you are concerned.
NOTE
Make sure you install the Introductory Ink
Cartridges included with your machine first.
a
Make sure that the power is turned on.
The Touchscreen will show
No Ink Cartridge.
NOTE
You can adjust the angle of the control panel by
lifting it. When lowering the control panel, make
sure you push the release button a that is
located behind the mark.
b
Open the ink cartridge cover a.
1
1