Connect The Power Cord; Choose Your Language - Brother DCP-8250DN Quick Setup Manual

5

Connect the power cord

Important
DO NOT connect the interface cable
yet.
a
Connect the AC power cord to the machine and
then plug it into an electrical socket.
b
Turn the machine's power switch on.
Important
DO NOT touch the Touchscreen immediately
after plugging in the power cord or turning the
machine on. Doing this may cause an error.
4
6

Choose your language

a
After turning the power switch on, the LCD
shows:
Press a or b to display your language and press
your language.
b
The LCD prompts you to confirm your
selection.
If the LCD shows the correct language, press
Yes.
—OR—
Press No to go back to step a to choose the
language again.
Note
If you have set the wrong language, you can
change the language from the Menu button on the
Touchscreen. (Menu, Initial Setup,
Local Language)