Brother DCP-8085DN Quick Setup Manual page 12

Parallel
15
Connect the power cord
a
Plug the AC power cord into an AC outlet. Turn
the power switch on.
The installation will continue automatically.
The installation screens appear one after
another.
b
Do one of the following:
For Windows
click Next.
Note
If this screen appears, click OK.
For Windows
Edition users, wait for a while since the
installation of the Brother drivers will
automatically start. The screens appear one
after another.
IMPORTANT
DO NOT cancel any of the screens during the
installation. It may take a few seconds for all
screens to appear.
c
When the On-Line Registration screen is
displayed, make your selection and follow the
on-screen instructions. Once you have
completed the registration process, close your
web browser to return to this window.
Then click Next.
12
®
2000 Professional users,
®
XP/XP Professional x64
16
Finish and restart
a
Click Finish to restart your computer.
After restarting the computer, you must be
logged on with Administrator rights.
b
In the Check for Firmware Updates screen,
choose the firmware update setting you want
and click OK. If you disabled the Status Monitor
setting in step h the screen will not appear.
Note
Internet access is required for the firmware
upgrade.
The installation is now
Finish
complete.
Note
XML Paper Specification Printer Driver
The XML Paper Specification Printer Driver is the
most suitable driver when printing from the
applications that use the XML Paper Specification
documents. Please download the latest driver by
accessing the Brother Solutions Center at
http://solutions.brother.com/.
®
Windows