Web Setting; Basic Web Setting; Wifi Setting; Wan Access Setting - Wansview NCM620W User Manual

Ncm series smartp2p ip camera
Table of Contents

Advertisement

http://www.wansview.com

3.2. Web setting

3.2.1. Basic web setting

Figure 13
The cameras support RTSP protocol, if select "on" of "RTSP authority verification", you
need to enter user name and password when invoke video by RTSP protocol.

3.2.2. WIFI setting

Please refer to chapter 2.3.

3.2.3. WAN access setting

In chapter 2.3, you have known how to do port forwarding. After the success of the port
forwarding, you can also visit camera by DDNS. The manufacturer has established a
DDNS system, and allotted a DDNS to every device, the user can view it from remote PC,
example of figure 14.
Figure 14
User can also use third party DDNS, such as
www.dyndns.com.
User applies a free
domain name from this website and fills the info into below blanks (Figure 15) and saves
the settings. Then the domain name can be used.
18

Advertisement

Table of Contents
loading

Table of Contents