Table of Contents
Advertisement
Figure 13
Figure 14
Figure 15
Page
-36-
How To Operate the Machine
Seat Adjustment (Standard)
The standard seat is adjustable forward/backward:
1.
The seat can be adjusted by raisng the seat and
loosening the 4 bolts. See figure 13.
2.
Position seat.
3.
Re-tighten bolts and lower seat.
Seat Adjustment (Deluxe)
The optional deluxe seat is adjustable in three ways:
1.
The seat can be adjusted to the forward/backward
position by using the lever on the lower right side of the
seat . Moving the lever will allow the seat to slide into
the preferred position. See figure 14.
2.
To adjust the angle of the back support portion of the
seat, turn the lever located in the middle right position
of the seat. Turning this clockwise will make the seat
more vertical. Turning the knob counterclockwise will
tilt the seat back.
See figure 15, A.
3.
To adjust the suspension of the seat for operator
comfort, use the lever on the side of the back support
section of the seat. This has three positions. The
upper position is for light weight operators. The
middle position is for medium weight operators. The
bottom position is for heavy weight operators. See
figure 15, B. NOTE: The lever must be pressed firmly
to change positions.
®
Clarke
Operator's Manual -Focus Rider Scrubber
EN
Advertisement
Table of Contents
