Seat Elevator Cable; Seat Elevator Motor - Permobil C400 Service Manual

Seat elevator cable & Seat elevator motor

Seat elevator cable

Removing
1. Remove the seat elevator;
instructions on page 31.
2. Remove the seat elevator sensors. Note the
position of the sensors for refitting, see fig.
Fitting
Fitting is the reverse procedure.

Seat elevator motor

Removing
1. Disconnect the seat elevator cable at the
motor, note the position of the connectors,
see fig.
2. Remove the seat elevator motor by taking out
the three bolts that hold it, see fig.
Fitting
Fitting is performed in reverse order.
Seat elevator motor connector.
follow the
Attachment of the sensors to the seat elevator.
32
Attachment of the
sensors to the seat elevator.
The motor is attached
by three bolts.