Seat Lift Cable - Permobil Chairman Entra Service Manual

Seat lift cable

Removing
1. Remove the seat lift; follow the instructions on
page 17.
2. Remove the seat lift sensors. Note the
position of the sensors for refitting, see fig. 36.
Fitting
Fitting is the reverse procedure.
NB! After fitting, check that the arm of the
rollerswitch can move freely.
1. Screw
2. Rollerswitch plate
3. Rollerswitch
4. Insulating plate
5. Seat lift
6. Plate
7. Nut
Fig.36. Attachment of the sensors
to the seat lift.
1 2 3
Fig.37. Attachment of the sensors
to the seat lift.
19
Seat lift cable
2 4 5 6 7