Support Wheels - Permobil C400 Service Manual

Support Wheels

The support wheels should always be fitted in the
upper position, see fig.
Removing the support wheels
1. Turn off the main power switch on the control
panel.
2. Remove the bolt, see fig.
WARNING
Removing the support wheels entails an increased risk of the
wheelchair tipping over. Wheelchairs with support wheels
fitted as standard must not be driven when the support
wheels are removed.
Fitting
1. Turn off the main power switch on the control
panel.
2. Fit the support wheel with screw, washer and
nut in the lower position, see fig.
OBSERVERA
The support wheels should always be fitted in the upper
position.
Removing the support wheel unit
1. Turn off the main power switch on the control
panel.
2. Remove the front wheel on the side in question,
see page 12.
3. Remove the three bolts that holds the support
wheel unit and the drive unit.
WARNING
Removing the support wheels entails an increased risk of the
wheelchair tipping over. Wheelchairs with support wheels
fitted as standard must not be driven when the support
wheels are removed.
Fitting
Fit the support wheel unit in the reverse order.
Chassis with support wheels fitted.
15
The support wheels should always be
fitted in the upper position.
Removal/fitting of the support wheel unit.
Support wheels