Notification Setting - Brickcom WCB-100A User Manual

Notification - To react in response to particular events. A typical application is that when a
motion is detected, the Network Camera sends buffered images to a FTP server, Samba,
SMTP or HTTP as notifications. In this page, you can specify which notification messages will
be sent when a trigger is activated. You can configure the Network Camera to send video
streaming URL or video clips to your email address or FTP site.
Click Apply or Reset to take effect.

Notification setting

When an event is triggered, you can specify what kind of action will be performed. You can
attach video clip to your email address, FTP site, samba or HTTP.
FTP - File Transfer Protocol (FTP) is often used as an application component to
automatically transfer files for program internal functions. Select to send the media files to a
FTP server when a trigger is activated. Enter the FTP IP address or hostname; by default,
the FTP port server is set to 21, enter account name and password to configure the setting.
- 40 -