Dialing Properties - Opticon H25 User Manual

Figure -75 Device Information

3.2.7 Dialing Properties

Table -32 Dialing properties
ICON

"Dialing Properties" Tab: (Figure 3-51)

In the When dialing from list, select the "Location" where you want to change set-
tings.(Figure 3-52)

To create a new location, select "New". Enter the name of the location, and then select
"OK".(Figure 3-53)

Enter or edit the area code and local country code as needed.

In Dial using, select "Tone dialing" or "Pulse dialing". Most phone lines are tone.

To automatically disable call waiting, select "¡ Disable call waiting by dialing", select
the appropriate number sequence in the list, or enter a new sequence.

Editing dialing patterns: (Figure 3-54)

Using the codes listed in the topic; revise the dialing patterns as needed.
Notes:



ITEM & FUNCTION
If you need to use character other than the ones listed here, use manual dialing.
Hyphens and spaces in dialing strings are ignored.
Some modems may not respond to the following characters, even though your
device lets you add them to the dial string.
60