Bluetooth Device Properties - Opticon H25 User Manual

Figure -53 Restore OK-Warm Boot Now

3.2.3 Bluetooth Device Properties

Note: Here are two ways to use Bluetooth Device.
1. Tap "Start" > "Programs" > "Bluetooth" > "Bluetooth Manager".
2. Tap "Start" > "Settings" > "Control Panel" > "Bluetooth Device Properties".
Table -28 Bluetooth Device Properties
ICON

"BT Service" Tab: (Figure 3-30)

Tap "Bluetooth Device Properties" to enable Bluetooth device(Figure 3-30).

Wait for 10 seconds in order to initialize the Bluetooth hardware correctly.

Tap the "Scan Device" button to initiate a scan for Bluetooth hardware. The Bluetooth
manager lists the Bluetooth devices that it finds, see Figure 3-33. If Bluetooth hardware is
not found the Bluetooth Hardware Error window appears, see Figure 3-34. Table 3-23
described the Bluetooth Icons.

Double tap the device to connect to on the device list. The Bluetooth Manager Authen-
tication window appears. Tap No to connect to the device without authentication, or tap
Yes to authenticate the device before connecting. (Figure 3-35)

If the Yes button was selected in the Bluetooth Manager Authentication window, the enter
PIN windows appears. Enter a PIN (between 1 and 16 characters) in the Enter PIN: text
box, and tap OK. The mobile computer sends the PIN request to the device for bonding.
(Figure 3-36)

When prompted, the same PIN must be entered on the other device. When the PIN is
entered correctly on the other device, the bonded icon appears on the device list. (Figure
3-37)

"Serial Port" Tab: (Figure 3-38)

Tap "Start" > "Programs" > "Bluetooth" > "Bluetooth SPP Manager" and Tap "Scan
Figure -54 Restore Settings after Cold Boot
ITEM & FUNCTION
53