Software (Warm) Reset; Resetting The Device - Opticon H25 User Manual

Use the Battery power control panel to set the duration to switch state to Suspend mode when system using battery power. This
will save battery power when Device is not in use.
Figure -24 Schemes Tab-Idle
Suspending:
The following conditions will suspend:

Press <Power> key while the Device is on.

The duration timer of item "Switch state to Suspend" expires, which indicates that there has been no use for a specified
of time.

The battery pack is completely discharged.
2.6.2 Resuming
Use one of following methods to resume (wake up the Device):

Press <Power> key to suspend or resume (wake up).
When a battery pack completely discharges while the unit is in suspend mode, the Device remains suspended until discharged
battery condition is corrected.

2.7 Resetting the Device

2.7.1 Software (Warm) Reset

A warm reset is a transition from the on, idle, or suspend power state that close all applications, clears the working RAM, but
preserves the file system.
Reason to Warm Reset: If an application " hangs ", initiate a warm reset to terminate the application only.
Process to Warm Reset: To a warm reset, press "Fn" + "Alpha" + "Enter" buttons simultaneously.
After Warm Reset:

The desktop appears with the application shortcuts on the screen.

The custom settings in the registry are persistent.
Figure -25 Schemes Tab-Suspend
35