Network Setup - Denon AVR-3311CI Owner's Manual

ENGLISH
Manual Setup

Network Setup

Make network settings.
Setting items
Network Connecting 1. Connect the LAN cable (vpage 22 "Connecting to a home network
Make settings for wired
(LAN)").
LAN. 2. Turn on this unit (vpage 6 "Turn on power").
This unit performs automatic network setup due to the DHCP function.
When connecting to a network that has no DHCP function, perform the
setting in step 3.
3. Set the IP address at the "Network Connecting".
MANUAL SETUP
NETWORK CONNECTING
DHCP
IP Address
Exit
Detail
Make settings for wired LAN
q On the menu, select "Network Connecting" – "Detail" and press
ENTER
w Use
press
The DHCP function is disabled.
e Use
press
• IP Address : Set the IP address within the ranges shown below.
The Network Audio function cannot be used if other IP addresses
are set.
CLASS A: 10.0.0.0 – 10.255.255.255
CLASS B: 172.16.0.0 – 172.31.255.255
CLASS C: 192.168.0.0 – 192.168.255.255
• Subnet Mask : When connecting an xDSL modem or terminal
adapter directly to this unit, input the subnet mask indicated in
the documentation supplied by your provider. Normally input
255.255.255.0.
• Default Gateway : When connected to a gateway (router), input its
IP address.
• Primary DNS, Secondary DNS : If there is only one DNS address
indicated in the documentation supplied by your provider, input it at
"Primary DNS". If there are two or more DNS addresses, input the
first one at "Secondary DNS".
84
Remote control operation
buttons
Default settings are underlined.
Setting details
NETWORK SETUP MANUAL SETUP NETWORK SETUP
NETWORK CONNECTING
DHCP
OFF
IP Address
192.168.100.19
Subnet Mask
Default gateway
Primary DNS
Secondary DNS
Proxy
q
Exit
ENTER Enter RETURN Return
Set IP address manually
.
o p to set "DHCP" to "OFF", then
i
.
0 – 9
uip or to input the address and
ENTER
.
Move the cursor
(Up/Down/Left/Right)
Setting items
Network Connecting
(Continued)
w
OFF
[192.168.000.001]
[255.255.255.000]
[000.000.000.000]
[000.000.000.000]
[000.000.000.000]
r e
RETURN Return
Confirm the setting
Setting details
ENTER
r Use i to select "Exit" and press .
Setup is complete.
• When connecting to the network via a Proxy server, select "Proxy" and
ENTER
press (vpage 84 "Proxy settings").
• If you are using a broadband router (DHCP function), there is no need
to make the settings at "IP Address" and "Proxy", since the DHCP
function is set to "ON" in this unit's default settings.
• If this unit is being used connected to a network without the DHCP
function, the network settings must be made. In this case, some
knowledge of networks is required. For details, consult a network
administrator.
• If you cannot connect to the Internet, recheck the connections and
settings (vpage 22).
• If you do not understand about Internet connection, contact your ISP
(Internet Service Provider) or the store from which you purchased your
computer.
• When you want to cancel the setting during IP address input, press
RETURN
.
Proxy settings : Make this setting when connecting to the Internet via a
proxy server.
MANUAL SETUP NETWORK SETUP MANUAL SETUP
NETWORK CONNECTING NETWORK CONNECTING
DHCP
DHCP ON
IP Address
IP Address 192.168.100.19
Subnet Mask
Default gateway
Primary DNS
Secondary DNS
Exit
Proxy
q
Detail
Exit
ENTER Enter RETURN Return
Set IP address and proxy manually Set if using proxy server
e
MANUAL SETUP NETWORK SETUP
NETWORK CONNECTING
Proxy ON
r
Proxy Address
Address [000.000.000.000]
y
Port [00000]
u
Exit
RETURN
Proxy server is used
q On the menu, select "Network Connecting" – "Detail" and press
ENTER
.
ENTER
w Use ui to set "Proxy" and press
e Use o p to set "Proxy" to "ON" and press
The proxy server is enabled.
Return to previous menu
NETWORK SETUP
ON
[192.168.100.019]
[255.255.255.000]
[000.000.000.000]
[000.000.000.000]
[000.000.000.000]
w
ENTER Enter RETURN Return
t
Return
.
i .