Kit Inspection; Ordering Replacement Parts - GREAT PLANES Revolver 50W Instruction Manual

Machine Screws are designated by a number,
threads per inch, and a length. For example

4-40 3/4" [19mm].
This is a number four screw
that is 3/4" [19mm] long with
forty threads per inch.
Socket Head Cap Screws (SHCS) are designated by a
number, threads per inch, and a length. For example

4-40 3/4" [19mm].
This is a 4-40 SHCS that
is 3/4" [19mm] long with
forty threads per inch.
● When you see the term test fi t in the instructions, it means
that you should fi rst position the part on the assembly
without using any glue, then slightly modify or custom
fi t the part as necessary for the best fi t.
● Whenever the term glue is written you should rely upon
your experience to decide what type of glue to use. When
a specifi c type of adhesive works best for that step, the
instructions will make a recommendation.
● Whenever just epoxy is specifi ed you may use either
30-minute (or 45-minute) epoxy or 6-minute epoxy. When
30-minute epoxy is specifi ed it is highly recommended that
you use only 30-minute (or 45-minute) epoxy, because you
will need the working time and/or the additional strength.
● Photos and sketches are placed before the step they refer
to. Frequently you can study photos in following steps to
get another view of the same parts.
● The Revolver is factory-covered with Top Flite MonoKote fi lm.
Should repairs ever be required, MonoKote can be patched
with additional MonoKote purchased separately. MonoKote
is packaged in six-foot rolls, but some hobby shops also sell
it by the foot. If only a small piece of MonoKote is needed
for a minor patch, perhaps a fellow modeler would give you
some. MonoKote is applied with a model airplane covering
iron, but in an emergency a regular iron could be used. A
roll of MonoKote includes full instructions for application.
Following are the colors used on this model and order
numbers for six foot rolls.
❍ Missile Red ❍ Orange
(TOPQ0201) (TOPQ0202)
● The stabilizer and wing incidences and engine thrust angles
have been factory-built into this model. However, some
technically-minded modelers may wish to check these
measurements anyway. To view this information visit the web
site at www.greatplanes.com and click on "Technical Data."
Due to manufacturing tolerances which will have little or no
effect on the way your model will fl y, please expect slight
deviations between your model and the published values.

KIT INSPECTION

Before starting to build, take an inventory of this kit to make
sure it is complete, and inspect the parts to make sure they
are of acceptable quality. If any parts are missing or are not
of acceptable quality, or if you need assistance with assembly,
contact Product Support. When reporting defective or missing
parts, use the part names exactly as they are written in the
Kit Contents list.
Replacement parts for the Great Planes Revolver ARF are
available using the order numbers in the Replacement Parts
List that follows. The fastest, most economical service can be
provided by your hobby dealer or mail-order company.
To locate a hobby dealer, visit the Great Planes web site at
www.greatplanes.com. Select "Where to Buy" in the menu
across the top of the page and follow the instructions provided
to locate a U.S., Canadian or International dealer.
Parts may also be ordered directly from Hobby Services by
calling (217) 398-0007, or via facsimile at (217) 398-7721, but
full retail prices and shipping and handling charges will apply.
Illinois and Nevada residents will also be charged sales tax. If
ordering via fax, include a Visa
expiration date for payment.
Be certain to specify the order number exactly as listed in the
Replacement Parts List. Payment by credit card or personal
check only; no C.O.D.
If additional assistance is required for any reason contact
Product Support by e-mail at productsupport@greatplanes.
com, or by telephone at (217) 398-8970.
❍ Sapphire Blue
(TOPQ0226)
4
Great Planes Product Support
3002 N Apollo Drive, Suite 1
Champaign, IL 61822
E-mail: airsupport@greatplanes.com

ORDERING REPLACEMENT PARTS

Mail parts orders Hobby Services
and payments by 3002 N Apollo Drive, Suite 1
personal check to: Champaign IL 61822
REPLACEMENT PARTS LIST
Order No. Description
GPMA4520 FUSELAGE
GPMA4521 WING SET
GPMA4522 HORIZONTAL STAB SET
GPMA4523
RUDDER
GPMA4524 COWL
GPMA4525 CANOPY/HATCH
GPMA4527 TAIL GEAR
GPMA4528 WING JOINER TUBE
GPMA4529 HORIZONTAL STAB TUBES
GPMA4530
WHEELPANTS
GPMA4531 DECALS
TOPA1657 ALUMINUM SPINNER
Ph: (217) 398-8970, ext. 5
Fax: (217) 398-7721
® or MasterCard ® number and