Ec Declaration Of Conformity - Flymo CONTOUR POWER PLUS CORDLESS Original Instructions Manual

If any part is found to be defective due to faulty manufac-
ture within the guarantee period, Husqvarna UK Ltd.,
through its Authorised Service Repairers will effect the
repair or replacement to the customer free of charge pro-
viding:
(a)The fault is reported directly to the Authorised Re-
pairer.
(b)Proof of purchase is provided.
(c)The fault is not caused by misuse, neglect or faulty ad-
justment by the user.
(d)The failure has not occurred through fair wear and
tear.
(e)The machine has not been serviced or repaired, taken
apart or tampered with by any person not authorised
by Husqvarna UK Ltd.
(f) The machine has not been used for hire.
(g)The machine is owned by the original purchaser.
(h) The machine has not been used outside of the coun-
try for which it was specified.
(i) The machine has not been used commercially.
* This guarantee is additional to, and in no way dimin-
ishes the customers statutory rights.
Husqvarna AB, S-561 82, Huskvarna, Sweden
Declare under our sole responsibility that the product(s);
Designation............................Lawn Trimmer
Designation of Type(s)...........CCT250
Identification of Series............See Product Rating Label
Year of Construction...............See Product Rating Label
Conforms to the essential requirements & provisions of the following EC Directives:
2006/42/EC, 2004/108/EC, 2000/14/EC, 2011/65/EU
based on the following EU harmonized standards applied:
EN60335-1, EN60335-2-91, EN60335-2-29, EN50366, EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3
The maximum A weighted sound pressure level L
is given in the table.
The maximum hand / arm vibration weighted value a
product(s) is given in the table.
2000/14/EC: The Measured Sound Power L
figures.
Conformity Assessment Procedure...............
Notified Body.................................................
Ulm 16/01/2013
P . Lameli
Global R & D Director - Hand held
Keeper of technical documentation
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
Copyright © 2013 Flymo S.A. All rights reserved. Flymo® and other product and feature names are registered or unregistered trademarks
5052867-04
Guarantee & Guarantee Policy

EC Declaration of Conformity

& Guaranteed Sound Power L
WA
Annex VI
Intertek, Cleeve Road
Leatherhead, Surrey
KT22 7SB, England
Type
Width of Cut (mm)
Power (kW)
Speed of Rotation of Cutting Device (rpm)
Measured Sound Power L
Guaranteed Sound Power L
L
Sound pressure (dB(A))
pA
K
Uncertainty (dB(A))
pA
Hand / arm vibration a
h
K
Uncertainty (m/s 2 )
ah
Weight (Kg)
Failures due to the following are not covered, therefore it
is important that you read the instructions contained in
this Operator's Manual and understand how to operate
and maintain your machine:
Failures not covered by guarantee
* Replacing Nylon Line.
* Failures as a result of not reporting an initial fault.
* Failures as a result of sudden impact.
* Failures as a result of not using the product in accor-
dance with the instructions and recommendations con-
tained in this Operator's Manual.
* Machines used for hire are not covered by this guarantee.
* The following items listed are considered as wearing
parts and their life is dependent on regular mainte-
nance and are, therefore not normally subject to a valid
warranty claim: Nylon Line., Spool & Line
* Caution!
Husqvarna UK Ltd. does not accept liability under the
warranty for defects caused in whole or part, directly or
indirectly by the fitting of replacement parts or additional parts
that are not either manufactured or approved by Husqvarna
UK Ltd., or by the machine having been modified in any way.
at the operator's position, measured according to EN60335-2-91,
pA
measured according to EN ISO 20643 on a sample of the above
h
(dB(A))
WA
(dB(A))
WA
(m/s 2 )
of Flymo S.A.
Husqvarna AB
S-561 82
Huskvarna
Sweden
values are according to the tabulated
WA
CCT250
25
0.5
8,000
84
92
81
2.5
1.94
1.5
5.3