Product Liability; Ec Declaration Of Conformity - Flymo UltraCut Reach 420 Operator's Manual

Product liability

In accordance with the German Product Liability Act, we hereby expressly declare that we accept no liability for damage incurred from our products
where said products have not been properly repaired by a FLYMO-approved service partner or where original FLYMO parts or parts authorised by
FLYMO were not used.

EC Declaration of Conformity

The undersigned hereby certifies as the authorised representative of the manufacturer, Husqvarna AB, 561 82 Huskvarna, Sweden, that, when leaving
our factory, the unit(s) indicated below is / are in accordance with the harmonised EU guidelines, EU standards of safety and product specific standards.
This certificate becomes void if the unit(s) is / are modified without our approval.
Description of the product:
Product type:
Article-Number:
EC-Directives:
Harmonised EN:
Deposited Documentation:
Conformity Assessment according to
Noise level: measured / guaranteed
Ulm, 31.12.2021
Authorised representative:
32420-85.960.01.indd 9 32420-85.960.01.indd 9
18V UltraCut Reach
420
9705319-xx
2006/42/EC
2014/30/EU
2011/65/EU
2000/14/EC
EN ISO 12100
EN 62841-1
EN 62841-4-2
GARDENA Technical Documentation,
M. Jäger, 89079 Ulm
2000/14/EC Procedure: art. 14 Annex V
87 dB(A) / 90 dB(A)
Reinhard Pompe
Vice President Products
Wolfgang Engelhardt
Vice President Supply Chain
9
08.10.21 11:43 08.10.21 11:43