Wheel IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product. IF ANY PARTS ARE MISSING CONTACT:- Husqvarna UK Ltd. Customer Service Department direct Telephone : 0844 844 4558 UK 1800 882 350 ROI...
4. Store in a cool dry place. local approved service centre or dealer who will re- For further information on Battery replacement contact move your old battery and fit a genuine Flymo replace- Husqvarna UK Ltd. Customer Service direct:- ment battery.
Page 4
Assembly Instructions cont’ Safety Guard Assembly (B1) & (B2) 1. Locate the safety guard over the cutting head. Ensure the nylon line is fed through the hole in the safety guard as illustrated in fig B1. 2. Push into location and turn safety guard in the direction illustrated in Fig B2, until a click is heard and the safety guard is securely locked in position.
Auto Line Feed System How the automatic line feed works (H) 1. When initially switching on the trimmer, a small length of line is fed out. 2. A ‘clattering’ noise will be heard when the nylon line hits the line cutter. DO NOT BE ALARMED this is quite nor- mal.
To replace nylon line. Eyelet For your convenience it is recommended you buy spool and line complete. Nylon line only is also avail- able. Both are available from Flymo Approved stock- ists. To fit spool and line complete: Cut out area 1.
A network of specialist dealers can be found in your 2. Always use genuine Flymo Spare Parts. local Yellow Pages. To obtain service on your Flymo 3. Prepacked spares are available from most Flymo product simply telephone or visit your local Service Approved stockists.
Need help?
Do you have a question about the CONTOUR POWER PLUS CORDLESS and is the answer not in the manual?
Questions and answers