Guard moulded on plug Wheel IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product. IF ANY PARTS ARE MISSING CONTACT:- Husqvarna UK Ltd. Customer Service Department direct Telephone : 0844 844 4558 UK...
Page 3
The normal plug fuse and household fuse only protect CONNECTORS the electrical equipment and are not a safeguard against Flymo connectors are suitable for use with 2 core cable only. electrocution. Under no circumstances should these connectors be used for earthed products.
Assembly Instructions Assembly of Switch Handle to Tube (A1) • Ensure that the internal cable is not twisted. 1. Insert the tube into the switch handle. 2. Push until it clicks into position. • ENSURE THAT THE TUBE IS FULLY LOCATED BY ATTEMPTING TO REMOVE IT.
How to trim and edge • WARNING • The use of eye protection is recommended. Do not lean over the trimmer whilst trimming or edging, objects may be thrown by the cutting line. Do not allow cutting head to rest on the ground. Do not overload your trimmer.
7. Refit the cap. To fit nylon line only: • Remember ! Your Flymo Trimmer is designed to use only nylon line with a maximum diameter of 1.5mm. Cleat Use only genuine Flymo nylon line.
Need help?
Do you have a question about the Contour and is the answer not in the manual?
Questions and answers