Tpm Header/Port 80 Header; Lan3/Lan4 Led Indication Header - Supermicro SuperO A1SAM-2750F User Manual

TPM Header/Port 80 Header

A Trusted Platform Module/Port 80
header, located at JTPM1, provides
STPM support and Port 80 connec-
tion. Use this header to enhance
system performance and data secu-
rity. See the table on the right for pin
definitions.

LAN3/LAN4 LED Indication Header

Connect an appropriate cable to
the LAN 3/4 LED indication header
located at JPK1 to indicate activity
status of LAN Port 3/LAN Port 4.
LAN1/LAN2 LED indicator connec-
tions are located on Pins 9/10, 11/12
of the front control panel (JF1). Refer
to Page 2-16 for more information
regarding NIC 1/2 LED indicators
located on JF1.
A
JBAT1
JF1
BATTERY
SP1
BUZZER
COM2
USB4/5
LAN2/LAN4 LAN1/LAN3
JUIDB1
JVGA1
BMC
JLAN2 JLAN1
LAN3/4 LED
PHY
A1SAM/A1SRM Series
Rev. 1.01
BIOS
SoC Processor
JBT1
1
2-23
TPM/Port 80 Header
Pin Definitions
Pin # Definition
1 LCLK
3 LFRAME#
5 LRESET#
7 LAD 3
9 +3.3V
11 LAD0
13 SMB_CLK4
15 +3V_DUAL
17 GND
19 LPCPD#
USB 2/3 USB0/1
COM1
B
IPMI_LAN
PWRI2C
Chapter 2: Installation
Pin # Definition
2 GND
4 <(KEY)>
6 +5V (X)
8 LAD 2
10 LAD1
12 GND
14 SMB_DAT4
16 SERIRQ
18 CLKRUN# (X)
20 LDRQ# (X)
A. TPM/Port 80
B. LAN3/LAN4 LED Indica-
tion Header