Kenwood CK 240 Instructions For Use - Installation Advice page 30

TABLE FOR THE CHOICE OF THE INJECTORS
BURNERS
Auxiliary (A)
Semi-rapid (SR)
Triple-ring
I
NCREASE OF AIR NECESSARY FOR GAS COMBUSTION
BURNERS
Auxiliary (A)
Semi-rapid (SR)
Triple-ring
LUBRICATION OF THE GAS TAPS
If the gas tap becomes stiff, it is necessary to dismount it accurately clean it with gasoline
and spread a bit of special grease resistant to high temperatures on it.
The operations must be executed by a qualified technician.
IMPORTANT
All intervention regarding installation maintenance and conversion of the appli-
ance must be fulfilled with original factory parts.
The manufacturer declines any liability resulting from the non-compliance of this
obligation.
30
Nominal Reduced
Power
Power
[kW] [kW]
1,00 0,30
1,75 0,45
3,50 1,50
G 30 - 28-30 mbar
G 31 - 37 mbar
By-pass
Ø injector
[1/100 mm]
[1/100 mm]
27
32
65
Air necessary for combustion [m
2,00
3,50
7,00
Cat:
G 20
20 mbar
By-pass
[1/100 mm]
50
65
95
3
(2 m /h x kW)
3
/h]
II
2H3+
Ø injector
[1/100 mm]
72 (X)
97 (Z)
135 (T)