Kenwood CK 240 Instructions For Use - Installation Advice page 28

CONVERSION TO LPG
OPERATIONS TO BE EXECUTED FOR
THE REPLACEMENT OF THE INJECTORS
OF THE TOP BURNERS
If the injectors are not supplied they
can be obtained from the "Service
Centre".
The diameter is marked on the injector
in cents of millimetre.
Select the injectors to be replaced
according to the "Table for the choice of
the injectors" (page 30).
To replace the injectors:
– Remove the gratings, the burner and
the covers;
– Using a wrench, substitute the nozzle
injectors "J" (Fig. 10.4a - 10.4b) with
those most suitable for the kind of gas
for which it is to be used.
The burners are conceived in such a
way so as not to require the regulation
of the primary air.
28
J
Fig. 10.4a
J
Fig. 10.4b