Removing the Main Unit
Press in the two hooks on the Main Unit and remove the Main Unit from the Terminal Unit.
End Plate Installation
Make sure to attach PFP-M End Plates to the ends of the Units.
• End Plate (sold separately)
PFP-M
Individual Mounting
Mounting the DIN Track
Attach the DIN Track to the inside of the control panel with screws to at least three locations.
• DIN Track (sold separately)
PFP-50N (50 cm) and PFP-100N (100 cm)
Install the DIN Track vertically to the ground.
E5@C Digital Temperature Controllers User's Manual (H174)
(1)
(2)
Group Mounting
Vertical: OK
(1)
Horizontal: NG
2 Preparations
2
(2)
(1)
2 - 11