A-1-3 Rating And Characteristics Of Options - Omron E5C series User Manual

Shock resistance
E5CC
E5CC-U
Weight E5EC
E5AC
E5DC
E5GC
E5CC/E5EC/
E5AC/E5GC
Degree of
protection E5CC-U
E5DC
Memory protection
The indication accuracy of K, T, and N thermocouples at a temperature of −100°C or less is ±2°C ±1 digit maximum.
*1
The indication accuracy of U and L thermocouples is ±2°C ±1 digit maximum.
The indication accuracy of B thermocouples at a temperature of 400°C or less is not specified.
The indication accuracy of B thermocouples at a temperature of 400 to 800°C is ±3°C maximum.
The indication accuracy of R and S thermocouples at a temperature of 200°C or less is ±3°C ±1 digit maximum.
The indication accuracy of W thermocouples is (±0.3% of PV or ±3°C, whichever is greater) ±1 digit maximum.
The indication accuracy of PLII thermocouples is (±0.3% of PV or ±2°C, whichever is greater) ±1 digit maximum.
Ambient temperature: −10°C to 23°C to 55°C
*2
Voltage range: −15 to +10% of rated voltage
*3 The unit is determined by the setting of the Integral/Derivative Time Unit parameter.
A-1-3 Rating and Characteristics of Options
Event inputs
Communications
Transfer output
Remote SP input
E5@C Digital Temperature Controllers User's Manual (H174)
2
300 m/s , 3 times each in X, Y, and Z directions
Approx. 120 g
Approx. 100 g
Approx. 210 g
Approx. 250 g
Approx. 120 g (Main Unit and Terminal Unit together)
Approx. 80 g
Front panel: IP66, rear case: IP20, terminals: IP00
Front panel: IP50, rear case: IP20, terminals: IP00
Main Unit: IP20, Terminal Unit: IP00
Non-volatile memory (number of writes: 1,000,000)
Contact Input
ON: 1 kΩ max., OFF: 100 kΩ min.
Non-contact Input
ON: Residual voltage 1.5 V max.; OFF: Leakage current 0.1 mA max.
Current flow: Approx. 7 mA per contact.
Transmission path: RS-485: Multidrop
Communications method: RS-485 (2-wire, half duplex)
Synchronization: Start-stop
Protocol: CompoWay/F or Modbus
Baud rate: 9.6, 19.2, 38.4, or 57.6 kbps
Current output: 4 to 20 mA DC, Load: 500 Ω max., Resolution: 10,000, Accuracy: ±0.3% FS
Linear voltage output: 1 to 5 VDC, Load: 1 kΩ min., Resolution: 10,000, Accuracy: ±0.3% FS
Current input: 4 to 20 or 0 to 20 mA DC with input impedance of 150 Ω max.
Voltage input: 1 to 5, 0 to 5, or 0 to 10 VDC with input impedance of 1 MΩ min.
Adapter: Approx. 10 g Terminal cover: Approx. 0.5 g
each
Adapter: Approx. 10 g ---
Adapter: Approx. 4 g × 2
Terminal Cover: Approx. 1 g each
Adapter: Approx. 4 g × 2
Terminal Cover: Approx. 1 g each
Adapters: Approx. 4 g × 2
A Appendices
A
A - 5